Description

ATCHAR FILLING AND PACKAGING

SCOPE OF OFFER:

1) Semi Automate Line for glass jar 400ml (Filling, Capping, Labelling,) 2000 per day
2) Plastic Tubs – 1kg, 2kg, 4kg, 9kg / Filling, Capping, Labelling, – 1200 per size per day
3) Sachets for 90g bags/ Form, Fill and seal, – approx. 2000 bags per hour

Automate Line for glass jar 400ml (Filling, Capping, Labelling, Shrink tunnel) 2000 per day
Plastic Tubs – 1kg, 2kg, 4kg, 9kg Filling, Capping, Labelling, – 1200 per size per day
Sachets for 90g bags/ Form, Fill and seal, – approx. 2000 bags per hour.



1) RAW MANGO CUTTING MACHINE 250 Kg/hr – 4HP

Product size : One Time setting of 20 X 16 mm or any size.

Application : Basically, it is a Raw Mango Cutting Machine. It is proven & only solution. A Good ALTERNATIVE to hand cutting. Perfection in Cutting Size, we are Specialist. It’s a Maintenance free unit. Very less ‘Churra’ not more than 3 – 7%. Maximum square piece and cuts with Hard Part also.

NO ROTORY IMPACTS TO FRUITS, NO DAMAGE TO FRUIT STRUCTURE. Build in conveyors at in-put end and Out-put End. Compact in size & easy for working. 70% saving in man power and Cost control of PER KG PRODUCTION Long of life SS 420Cutting blades is about 4100,000 Kgs. One Time setting of product cut size or otherwise 20 X16 mm is STANDARD.

2) GLASS JAR – 400G (2000 PER SIZE BOTTLES DAY)

  • Lobe pump filler

Filling Machine (with20mm nozzle) Material: ss304 Filling capacity:18L/5rev Max speed:30rpm Max single filling time:99 second Inlet/outlet:38mm Servo motor:1.0kw Voltage:220v 50hz single phase Horizontal Mixing Hopper material: ss304 Capacity:80L Motor:120w Speed Range:0-33rpm

3) BOTTLE CAPPER (FOR 400ML JARS)

4) LABELLING MACHINE FOR 400ml GLASS JARS (WITH OUT FEED TABLE – 500MM X 750MM)

  • Speed 0-80 PCS/min
  • Bottle diameter Ф 20 – Ф 100mm
  • Bottle Height 25-300mm
  • Label size wide 10-140mm
  • Label size length 15-200mm
  • Labelling precision + 1mm
  • Maximum diameter 200mm
  • Power supply AC110V / 220V. 0.5KW
  • Machine size 1430*1050*940mm
  • Weight 100kg

5) PLASTIC TUBS – 1KG, 2KG, 4KG, 9KG FILLING (1200 PER SIZE PER DAY)

  • AUGER FILLER WITH HOPPER
  • 300L HOPPER TANK
  • HORIZONTAL AUGER
  • PADDLE MIXERS
  • VERTICAL AUGER HEAD

6) TOP UP OIL GEAR PUMP FILLER

  • Volume: 10ml-10000ml
  • Accuracy: 0.5-1%
  • Filling Speed: 100ml 24P/min 300ml 16P/min 1000ml 11P/min
  • Supply Power: 1P 220V 50-60Hz 400W
  • Size: 310×480×310mm
  • Net Weight: 18Kg
  • Single head gear pump filling machine
  • Option pumps, 10-30 liters per minute gear or lobe pumps
  • Nozzle to suit sample container
  • Nozzle support bar
  • Automatic gating system down stream
  • Feed pipe

7) CAPPING MACHINE FOR LARGER TUBS/BUCKETS

CONVEYOR WITH OVERHEAD PRESS ON CONVEYOR

8) SACHET FILLING MACHINE FOR 90G BAGS – 8cm x 12.5cm (Mango piece filling + liquid doser)

  • Material: SS 304
  • Bag width: 50-100mm
  • Bag length: 100-400mm
  • Speed: up-to 25 bags/min
  • Packing weight: 50g-200g ( ±1-2%)
  • Machine voltage: 220V / 1P / 50Hz / 3KW
  • Rotor pump voltage: 380V / 3P / 50Hz / 2.2kw
  • Bag type: Pillow bag
  • Air compressor: 0.65mpa, 0.4m2/min
  • Machine size: 1250mm x 960mm x 1800mm
  • Pump size: 1600mm x 800mm x 1200mm

Including:

  • Rotor pump (for semi solids)
  • Piston pump for top up
  • One bag former 150L material tank
  • Colour mark detector DN51 304 filling pipe
  • Free quick wear spare part Finished product conveyor.

9) SEMI AUTOMATIC SHRINK WRAPPER